Member Details - proMetheus

João Carlos de Castro Abrantes

jabrantes@estg.ipvc.pt
Type: Integrated
Last academic degree: Habilitation

ORCID: 0000-0003-4595-3641
Scopus ID: 57221193158
Researcher ID/Publons: B-1788-2008
Ciência ID: 6D12-6554-B318

Short biography

- João C.C. Abrantes (born 1964) is a Full Professor in Materials Science and Engineering, Director of proMetheus - Research Unit on Materials, Energy and Environment for Sustainability, at the Polytechnic Institute of Viana do Castelo. - João made all academic graduation at the Ceramic and Materials Department of the University of Aveiro, having concluded his Ph.D. in 2011, working on materials for application on oxygen sensor and solid oxide fuel cells.

- He has published more than 80 SCI papers (h-index 23), and 1 patent applications, and gave over 30 talks at international conferences. He has supervised several MSc and PhD students, and participated in more than 10 research projects supported by the Portuguese Scientific Council.

SCIENTIFIC INTERESTS

- For 20 years João has been interested in the synthesis and characterization of ceramic materials for high temperature electrochemical applications, such as solid oxide fuel cells, oxygen sensors and membranes. More recently, he started his interest on cellular ceramics for multipurpose application, in particular on phase change materials for thermal energy storage.

- João is particularly strong in defect chemistry modelling of the high temperature electrical conductivity behaviour of ceramic electrolytes and semiconductors and on impedance spectroscopy analysis of polycrystalline ceramics.

ACADEMIC ACTIVITIES

Since 1991, João has participated in the creation of several higher education courses (graduation and post-graduation), including Ceramics Engineering, Materials Engineering, Chemical Engineering and Mechanical Engineering, as well as collaborating in courses on Renewable Energy Engineering and Product Design.

In this courses, his teaching collaboration was focused on Materials Science, Materials in Energy Conversion Systems and Energy Efficiency in Industry.

Select a project type

Name
Fineness Optimization of Waste Glass Powder as a Sustainable Alternative to Fly Ash in Cementitious Mixtures Carlos Jesus, Klaus Pontes, Ruben Couto, Rui Reis, Manuel Ribeiro, João C. C. Abrantes, João Castro-Gomes, Aires Camões, Raphaele Malheiro Buildings, Volume 16, 8, (2026), 1560 ind_type:2
Effect of heat treatment on tensile properties and fracture behavior of LPBF-manufactured Cu–10Al and Cu–10Sn alloys Ramin Rahmani, Pedro R. Resende, Rúben Couto, Ricardo F.R. Pinto, Sérgio I. Lopes, João C.C. Abrantes Journal of Alloys and Compounds Communications, Volume 11, (2026), 100228 ind_type:2
A Brief Review on Biomimetics 3D Printing Design Couto R.; Resende P.R.; Pinto R.; Rahmani R.; Abrantes J.C.C.; Feijoo I. Biomimetics, Volume 10, 10, (2025), 647 ind_type:2
A Brief Review on Biomimetics 3D Printing Design João C.C. Abrantes Dia da Marinha - Colóquio - O Mar: Tradições e Desafios, (2025), ind_type:9
On the Electrical Resistivity Measurement Methods and Properties of Conductive 3D-Printing PLA Filaments Vasques C.M.A.; Ferreira J.P.R.; Figueiredo F.A.V.; Abrantes J.C.C. ASEC 2024, (2025), 26 ind_type:2
Synergistic effect of high-energy milling and organic intercalation on the kaolin properties and structural evolution Zaccaron A.; Raupp-Pereira F.; de Souza Nandi V.; Abrantes J.C.C.; Ribeiro M.J.; Bernardin A.M. Applied Clay Science, Volume 271, (2025), 107811 ind_type:2
Technology overview and investigation of the quality of a 3D-printed maraging steel demonstration part Vasques C.M.A.; Cavadas A.M.S.; Abrantes J.C.C. Materials Science in Additive Manufacturing, Volume 4, 2, (2025), 025040002 ind_type:2
Study of Mg doping on the zirconium and lanthanide sites of Ln2Zr2O7 (Ln = Sm, Gd) pyrochlores Lyskov N.V.; Kolbanev I.V.; Borunova A.B.; Vorobieva G.A.; Abrantes J.C.C.; Gomes E.; Danilov N.A.; Medvedev D.A.; Shlyakhtina A.V. Ceramics International, (2025), ind_type:2
Recovery of End-of-Life Building Materials: Thermal Decomposition and Phase Transformation of Chrysotile in Asbestos-Containing Fiber Cement Boards Curado A.; Nunes L.J.R.; Carvalho A.; Abrantes J.; Lima E.; Tome M. Fibers, Volume 13, 5, (2025), 62 ind_type:2
Magnetic and thermo-responsive microparticles based on calcium phosphates with high potential to produce structures for bone regeneration and local hyperthermia Carvalho T.S.S.; Belo J.H.; Abrantes J.C.C.; Banobre-Lopez M.; Lopes D.; Kovalevsky A.V.; Kaushal A.; Araujo J.P.; Olhero S.M.; Torres P.M.C. Materials Research Bulletin, Volume 185, (2025), 113274 ind_type:2
Magnetic and thermo-responsive microparticles based on calcium phosphates with high potential to produce structures for bone regeneration and local hyperthermia E. Gomes, A.A.L. Ferreira, R. Devaraj, J.C.C. Abrantes E-MRS 2024 FALL MEETING & EXHIBIT, (2024), ind_type:10
Magnetic and thermo-responsive microparticles based on calcium phosphates with high potential to produce structures for bone regeneration and local hyperthermia Tomé, Mário; Curado, António; João Abrantes; Leonel J. R. Nunes; Carvalho, Maria Arlete Carvalho; Eduarda Gomes 4 TH INTERNATIONAL SCIENTIFIC CONFERENCE ON ECOLOGICAL AND ENVIRONMENTAL ENGINEERING, (2024), ind_type:9
Magnetic and thermo-responsive microparticles based on calcium phosphates with high potential to produce structures for bone regeneration and local hyperthermia João C.C. Abrantes SIBAE XXVI Congress - Sociedad Iberoamericana de Electroquimica, (2024), ind_type:9
Magnetic and thermo-responsive microparticles based on calcium phosphates with high potential to produce structures for bone regeneration and local hyperthermia Ramin Rahmani, Pedro R. Resende, João C.C. Abrantes, Sérgio I. Lopes EURO MAT2023, 3–7 Sep 2023, Frankfurt am Main, Germany, (2024), ind_type:9
Magnetic and thermo-responsive microparticles based on calcium phosphates with high potential to produce structures for bone regeneration and local hyperthermia Eduarda Gomes, António Ferreira, Devaraj Ramasamy,João C.C. Abrantes SIBAE XXVI Congress - Sociedad Iberoamericana de Electroquimica, (2024), ind_type:10
Structural analysis of selective laser melted copper-tin alloy Rahmani R.; Resende P.R.; Couto R.; Lopes S.I.; Kumar R.; Maurya H.S.; Karimi J.; Afonso A.M.; Hussain A.; Abrantes J.C.C. Journal of Alloys and Metallurgical Systems, Volume 7, 100097, (2024), 100097 ind_type:2
Effect of yttrium ion on the space charge potential across grain boundaries regions of gadolinia-doped ceria electrolytes Gomes E.; Ramasamy D.; Ferreira A.A.L.; Abrantes J.C.C. Solid State Ionics, Volume 413, (2024), ind_type:2
Design and performance analysis of a High Field Side antenna for Plasma Position Reflectometry control on DTT Santos J.M.; Silva A.; da Silva F.; Nietiadi Y.; Luis R.; Ferreira J.; De Masi G.; Tudisco O.; Cavazzana R.; Resende P.R.; Abrantes J.C.C.; Heuraux S.; Ricardo E.; Ribeiro T. Fusion Engineering and Design, Volume 201, (2024), ind_type:2
Characterization and processing of kaolin from southern Brazil for potential strategic application in the porcelain stoneware tiles manufacturing Comin A.B.; Zaccaron A.; Saviatto E.; Acordi J.; Raupp-Pereira F.; Abrantes J.C.D.C.; Ribeiro M.J.; de Souza G.S. Journal of South American Earth Sciences, Volume 148, (2024), ind_type:2
The Use of Asbestos and Its Consequences: An Assessment of Environmental Impacts and Public Health Risks Curado A.; Nunes L.J.R.; Carvalho A.; Abrantes J.; Lima E.; Tome M. Fibers, Volume 12, 12, (2024), 102 ind_type:2
The Use of Asbestos and Its Consequences: An Assessment of Environmental Impacts and Public Health Risks João C.C. Abrantes E-MRS 2024 FALL MEETING & EXHIBIT, (2024), ind_type:9
Design and performance analysis of a High Field Side antenna for Plasma Position Reflectometry control on DTT Santos J.M.; Silva A.; da Silva F.; Nietiadi Y.; Luis R.; Ferreira J.; De Masi G.; Tudisco O.; Cavazzana R.; Resende P.R.; Abrantes J.C.C.; Heuraux S.; Ricardo E.; Ribeiro T. Fusion Engineering and Design, Volume 201, (2024), 114275 ind_type:2
Design and performance analysis of a High Field Side antenna for Plasma Position Reflectometry control on DTT A.A.L. Ferreira, E. Gomes, J.C.C. Abrantes, F.M.B. Marques E-MRS 2024 FALL MEETING & EXHIBIT, (2024), ind_type:10
Defect chemistry of pyrochlore Pr2O3-ZrO2 system: the relevant thermodynamic parameters Abrantes J.C.C.; Gomes E.; Shlyakhtina A.V. Journal of Solid State Electrochemistry, (2024), ind_type:2
Defect chemistry of pyrochlore Pr2O3-ZrO2 system: the relevant thermodynamic parameters João C.C. Abrantes Fúrum da Economia Azul - Rotary Club International, (2024), ind_type:9
Defect chemistry of pyrochlore Pr2O3-ZrO2 system: the relevant thermodynamic parameters João C.C. Abrantes Conferência Mar: Energia e Sustentabilidade, (2023), ind_type:9
Defect chemistry of pyrochlore Pr2O3-ZrO2 system: the relevant thermodynamic parameters Ramin Rahmani, Javad Karimi, Farideh Davoodi, João C.C. Abrantes, Pedro R. Resende, Sérgio I. Lopes EURO PM2023, 1–4 Oct 2023, Lisbon, Portugal, (2023), ind_type:9
Defect chemistry of pyrochlore Pr2O3-ZrO2 system: the relevant thermodynamic parameters Devaraj Ramasamy, Eduarda Gomes, António A.L. Ferreira, João C.C. Abrantes E-MRS 2023 Spring Meeting, (2023), ind_type:10
Defect chemistry of pyrochlore Pr2O3-ZrO2 system: the relevant thermodynamic parameters Ana Ferraz, António Curado, Joana Nogueira, João Abrantes, Leonel Nunes, Mafalda Laranjo e Mário Tomé (2023), ind_type:42
Overview of Selective Laser Melting for Industry 5.0: Toward Customizable, Sustainable, and Human-Centric Technologies Rahmani R.; Karimi J.; Resende P.R.; Abrantes J.C.C.; Lopes S.I. Machines, Volume 11, 5, (2023), 522 ind_type:2
Overview of Selective Laser Melting for Industry 5.0: Toward Customizable, Sustainable, and Human-Centric Technologies António A.L. Ferreira, Devaraj Ramasamy, Eduarda Gomes, João C.C. Abrantes E-MRS 2023 Spring Meeting, (2023), ind_type:10
Plataformas digitais como estratégia para a desmaterialização do campus académico João C.C. Abrantes Livro de Atas da 5ª Conferência Campus Sustentável - Capacitação para a ação climática: do campus à comunidade, (2023), 37-38 ind_type:11
pH-Dependent Synthesis of Pure-Phase BiI3 and BiOI by Electrodeposition Kumar G.M.; Varma D.S.; Jothi S.; Ramasamy D.; Abrantes J.C.C.; Rangarajan M. ChemistrySelect**, Volume 8, 29, (2023), ind_type:2
pH-Dependent Synthesis of Pure-Phase BiI3 and BiOI by Electrodeposition João C.C. Abrantes Roterio de Engenharia do Mar - Ordem dos Engenheiros**, (2023), ind_type:9
pH-Dependent Synthesis of Pure-Phase BiI3 and BiOI by Electrodeposition J. M. Santos, A. Silva, F. da Silva, Y. Nietiadi, R. Luís, J. Ferreira, O. Tudisco, R. Cavazzana, P. R. Resende, J. C. C. Abrantes, G. De Masi, S. Heuraux, E. Ricardo, T. Ribeiro 15th International Symposium on Fusion Nuclear Technology (ISFNT-15),**, (2023), ind_type:10
pH-Dependent Synthesis of Pure-Phase BiI3 and BiOI by Electrodeposition Ramin Rahmani, Javad Karimi, Farideh Davoodi, João C.C. Abrantes, Pedro R. Resende, Sérgio I. Lopes. Euro PM2023 Congress & Exhibition, European Powder Metallurgy Association**, (2023), ind_type:10
pH-Dependent Synthesis of Pure-Phase BiI3 and BiOI by Electrodeposition João C.C. Abrantes GreenFest**, (2023), ind_type:9
Additive Manufacturing Integrated Technologies Applied to Human Machine Interfaces: An Industry 5.0 Overview Rahmani R.; Karimi J.; Davoodi F.; Abrantes J.C.C.; Resende P.R.; Lopes S.I. Euro Powder Metallurgy 2023 Congress and Exhibition, PM 2023, (2023), ind_type:2
Additive Manufacturing Integrated Technologies Applied to Human Machine Interfaces: An Industry 5.0 Overview Rahmani R.; Karimi J.; Davoodi F.; Abrantes J.C.C.; Resende P.R.; Lopes S.I. Euro Powder Metallurgy 2023 Congress and Exhibition, PM 2023, (2023), ind_type:2
Additive Manufacturing Integrated Technologies Applied to Human Machine Interfaces: An Industry 5.0 Overview João C.C. Abrantes 5.ª Conferência Campus Sustentável (CCS 2023), (2023), ind_type:9
Additive Manufacturing Integrated Technologies Applied to Human Machine Interfaces: An Industry 5.0 Overview João C.C. Abrantes II Encontro Com Ciência, (2023), ind_type:9
Additive Manufacturing Integrated Technologies Applied to Human Machine Interfaces: An Industry 5.0 Overview A.A.L. Ferreira, D. Ramasamy, E., J.C.C. Abrantes 23rd World Hydrogen Congress (WHEC - 2022), (2022), ind_type:10
Additive Manufacturing Integrated Technologies Applied to Human Machine Interfaces: An Industry 5.0 Overview D. Ramasamy, E. Gomes, A.A.L. Ferreira, J.C.C. Abrantes 23rd World Hydrogen Congress (WHEC - 2022), (2022), ind_type:10
Hydration and phase development of recycled cement Bogas J.A.; Real S.; Carrico A.; Abrantes J.C.C.; Guedes M. Cement and Concrete Composites, Volume 127, (2022), 104405 ind_type:2
Hydration and phase development of recycled cement E. Gomes, D. Ramasamy, A.A.L. Ferreira, J.C.C. Abrantes 23rd World Hydrogen Congress (WHEC - 2022), (2022), ind_type:10
Valorisation of Recycled Cement Paste: Feasibility of a Short-Duration Carbonation Process Silva A.; Nogueira R.; Bogas A.; Abrantes J.; Wawrzynczak D.; Sciubidlo A.; Majchrzak-Kuceba I. Materials, Volume 15, 17, (2022), ind_type:2
Study of oxygen-ion conductivity and luminescence in the ZrO2 – Nd2O3 system: Impact of local heterogeneity Lyskov N.V.; Shchegolikhin A.N.; Stolbov D.N.; Kolbanev I.V.; Gomes E.; Abrantes J.C.C.; Shlyakhtina A.V. Electrochimica Acta, Volume 403, (2022), 139632 ind_type:2
Study of oxygen-ion conductivity and luminescence in the ZrO2 – Nd2O3 system: Impact of local heterogeneity Bogas, José Alexandre; Real, Sofia; Carriço, Ana; Abrantes, J.C.C., Guedes, Mafalda Construção 2022, (2022), ind_type:9
Study of oxygen-ion conductivity and luminescence in the ZrO2 – Nd2O3 system: Impact of local heterogeneity Gomes E.; Ramasamy D.; Ferreira A.A.L.; Abrantes J.C.C. Proceedings of WHEC 2022 - 23rd World Hydrogen Energy Conference: Bridging Continents by H2, (2022), 842-844 ind_type:2
Electrochemical Synthesis of Bismuth Iodide and Bismuth Oxyiodide Mohan Kumar Govindaraju, Deepak Suresh Varma, Sathiskumar Jothi, Devaraj Ramasamy, João Abrantes, Murali Rangarajan ChemRxiv. Cambridge, (2022), ind_type:5
Electrochemical Synthesis of Bismuth Iodide and Bismuth Oxyiodide Ramasamy D.; Gomes E.; Ferreira A.A.L.; Abrantes J.C.C. Proceedings of WHEC 2022 - 23rd World Hydrogen Energy Conference: Bridging Continents by H2, (2022), 845-847 ind_type:2
Electrochemical Synthesis of Bismuth Iodide and Bismuth Oxyiodide Renata D'arc Coura, Ana Cristina Rodrigues, Ana Ferraz, João C.C. Abrantes, Joaquim Mamede Alonso, Miguel Brito Instituto Nacional da Propriedade Industrial Patente de Invenção Nacional, 116114, (2022), ind_type:12
Electrochemical Synthesis of Bismuth Iodide and Bismuth Oxyiodide Ferreira A.A.L.; Ramasamy D.; Gomes E.; Abrantes J.C.C. Proceedings of WHEC 2022 - 23rd World Hydrogen Energy Conference: Bridging Continents by H2, (2022), 848-850 ind_type:2
Electrochemical Synthesis of Bismuth Iodide and Bismuth Oxyiodide Eduarda Gomes, João C.C. Abrantes, António A.L. Ferreira, Devaraj Ramasamy, Jorge R. Frade ANM 2021, (2021), ind_type:10
Electrochemical Synthesis of Bismuth Iodide and Bismuth Oxyiodide Oliveira, A. T. F., Martins, J., Rego, P., Vieira, P., Costa, P., Faria, P., Paiva, S., Cavadas, A., Curralo, A., Viana, A., Vasques, C. M. A., Cruz, E., Romero, L., Abrantes, J., Nunes, J., Castro, P o Congresso Nacional de Práticas Pedagógicas no Ensino Superior (CNaPPES.21), (2021), ind_type:9
Effective production of multifunctional magnetic-sensitive biomaterial by an extrusion-based additive manufacturing technique Rodrigues A.F.M.; Torres P.M.C.; Barros M.J.S.; Presa R.; Ribeiro N.; Abrantes J.C.C.; Belo J.H.; Amaral J.S.; Amaral V.S.; Banobre-Lopez M.; Bettencourt A.; Sousa A.; Olhero S.M. Biomedical Materials (Bristol), Volume 16, 1, (2021), 015011 ind_type:2
Effective production of multifunctional magnetic-sensitive biomaterial by an extrusion-based additive manufacturing technique C. M. A. Vasques, P. M. R. Resende, A. M. S. Cavadas, J. C. C. Abrantes Proceedings of the 2nd International Electronic Conference on Applied Sciences (ASEC 2021), T. Kobayashi and N. Cennamo (Editors), 15-31 October (online), MDPI: Basel, Switzerland, 2021, (2021), ind_type:11
Combined pretreatment by ultrasound and struvite precipitation of raw substrates: A strategy to overcome cn ratio unbalance in nitrogen-rich anaerobic co-digestion systems Coura R.D.; Rodrigues A.C.; Alonso J.M.; Ferraz A.I.; Brito L.M.; Abrantes J.C.C.; Brito A.G. Sustainability (Switzerland), Volume 13, 4, (2021), 1-14 ind_type:2
Combined pretreatment by ultrasound and struvite precipitation of raw substrates: A strategy to overcome cn ratio unbalance in nitrogen-rich anaerobic co-digestion systems César M. A. Vasques, Pedro M. R. Resende, Adélio M. S. Cavadas, João C. C. Abrantes 2nd International Electronic Conference on Applied Sciences, session Mechanical Engineering, (2021), ind_type:9
Combined pretreatment by ultrasound and struvite precipitation of raw substrates: A strategy to overcome cn ratio unbalance in nitrogen-rich anaerobic co-digestion systems Devaraj Ramasamy, João C.C. Abrantes, Eduarda Gomes, António A.L. Ferreira, Jorge R. Frade ANM 2021, (2021), ind_type:9
Structure, conductivity and magnetism of orthorhombic and fluorite polymorphs in MoO3–Ln2O3 (Ln = Gd, Dy, Ho) systems Shlyakhtina A.V.; Avdeev M.; Lyskov N.V.; Abrantes J.C.C.; Gomes E.; Denisova K.N.; Kolbanev I.V.; Chernyak S.A.; Volkova O.S.; Vasiliev A.N. Dalton Transactions, Volume 49, 9, (2020), 2833-2842 ind_type:2
Structure, conductivity and magnetism of orthorhombic and fluorite polymorphs in MoO3–Ln2O3 (Ln = Gd, Dy, Ho) systems João C.C. Abrantes Euroknowledge Webinar, (2020), ind_type:9
Structure, conductivity and magnetism of orthorhombic and fluorite polymorphs in MoO3-Ln2O3 (Ln = Gd, Dy, Ho) systems Shlyakhtina A.V.; Avdeev M.; Lyskov N.V.; Abrantes J.C.C.; Gomes E.; Denisova K.N.; Kolbanev I.V.; Chernyak S.A.; Volkova O.S.; Vasiliev A.N. Dalton Transactions, Volume 49, 9, (2020), 2833-2842 ind_type:2
Evolution of oxygen-ion and proton conductivity in Ca-doped Ln2Zr2O7 (Ln = Sm, Gd), located near pyrochlore-fluorite phase boundary Shlyakhtina A.V.; Abrantes J.C.C.; Gomes E.; Lyskov N.V.; Konysheva E.Y.; Chernyak S.A.; Kharitonova E.P.; Karyagina O.K.; Kolbanev I.V.; Shcherbakova L.G. Materials, Volume 12, 15, (2019), 2452 ind_type:2
Evolution of oxygen-ion and proton conductivity in Ca-doped Ln2Zr2O7 (Ln = Sm, Gd), located near pyrochlore-fluorite phase boundary João C.C. Abrantes, Eduarda Gomes, António A.L. Ferreira, Devaraj Nadar, Jorge R. Frade HYCELTEC 2019, (2019), ind_type:10
Structure and conductivity of Nd6MoO12 -based potential electron-proton conductors under dry and wet redox conditions Shlyakhtina A.V.; Avdeev M.; Abrantes J.C.C.; Gomes E.; Lyskov N.V.; Kharitonova E.P.; Kolbanev I.V.; Shcherbakova L.G. Inorganic Chemistry Frontiers, Volume 6, 2, (2019), 566-575 ind_type:2
Surface functionalization of cuttlefish bone-derived biphasic calcium phosphate scaffolds with polymeric coatings Neto A.S.; Fonseca A.C.; Abrantes J.C.C.; Coelho J.F.J.; Ferreira J.M.F. Materials Science and Engineering: C, (2019), 110014 ind_type:2
Study of the dust produced in rehabilitation works Oliveira C.; Reis C.; Abrantes J.C.C.; Silva L.T.; Silva P.L.; Silva J.F. Procedia Structural Integrity, Volume 22, (2019), 144-150 ind_type:2
Study of the dust produced in rehabilitation works Pressure effects on the microstructural development during sintering and dielectric response of BaLa4Ti4O15 Shaping 7 - 11-13 September 2019, Aveiro, Portugal., (2019), ind_type:9
Study of the dust produced in rehabilitation works Filipa Rodrigues, Paula M. C. Torres, Ana Bettencourt, João Abrantes, João Belo, João Amaral, Vitor Amaral, Susana Olhero Shaping 7, (2019), ind_type:9
Novel sintering-free scaffolds obtained by additive manufacturing for concurrent bone regeneration and drug delivery: Proof of concept Marques C.F.; Olhero S.M.; Torres P.M.C.; Abrantes J.C.C.; Fateixa S.; Nogueira H.I.S.; Ribeiro I.A.C.; Bettencourt A.; Sousa A.; Granja P.L.; Ferreira J.M.F. Materials Science and Engineering C, Volume 94, (2019), 426-436 ind_type:2
Novel sintering-free scaffolds obtained by additive manufacturing for concurrent bone regeneration and drug delivery: Proof of concept Paula M. C. Torres, Raquel Amaral, Ms. Filipa Rodrigues, João Abrantes, Ana Bettencourt, Pedro Carvalho, Susana Olhero Shaping 7 , (2019), ind_type:10
Novel sintering-free scaffolds obtained by additive manufacturing for concurrent bone regeneration and drug delivery: Proof of concept E. Gomes, António A.L. Ferreira, J.C.C. Abrantes, Jorge R. Frade Electroceramics XVI, (2018), ind_type:10
Novel sintering-free scaffolds obtained by additive manufacturing for concurrent bone regeneration and drug delivery: Proof of concept R. Cunha Reis, M.J. Ribeiro, J.C.C. Abrantes and Aires Camões Encontro Nacional - Betão Estrutural, (2018), ind_type:9
Novel sintering-free scaffolds obtained by additive manufacturing for concurrent bone regeneration and drug delivery: Proof of concept J.C.C. Abrantes, E. Gomes, A.N. Shchegolikhin, L.G. Shcherbakova, A.V. Shlyakhtina Electroceramics XVI, (2018), ind_type:10
Influence of the CaP ratio and cooling rate on the allotropic ???-tricalcium phosphate phase transformations Brazete D.; Torres P.M.C.; Abrantes J.C.C.; Ferreira J.M.F. Ceramics International, Volume 44, 7, (2018), 8249-8256 ind_type:2
Influence of the CaP ratio and cooling rate on the allotropic ???-tricalcium phosphate phase transformations J.C.C. Abrantes, E. Gomes, M. Avdeev, N.V. Lyskov, E.P. Kharitonova, L.G. Shcherbakova, A.V. Shlyakhtina 13th International Symposium on Systems with Fast Ionic Transport (ISSFIT-13), (2018), ind_type:10
Linking sintering stresses to nano modification in the microstructure of BaLa 4 Ti 4 O 15 by transmission electron microscopy Selvaraj N.B.; Fernandes M.; Reaney I.M.; Abrantes J.C.C.; Denneulin T.; Snoeck E.; Vilarinho P.M.; Senos A.M. Materials Characterization, Volume 142, (2018), 1-8 ind_type:2
Linking sintering stresses to nano modification in the microstructure of BaLa 4 Ti 4 O 15 by transmission electron microscopy A.V. Shlyakhtina, M. Avdeev, J.C.C. Abrantes, E. Gomes, N.V. Lyskov, I.V. Kolbanev, L.G. Shcherbakova International Conference on Advanced Nanomaterials, (2018), ind_type:9
Linking sintering stresses to nano modification in the microstructure of BaLa 4 Ti 4 O 15 by transmission electron microscopy A.V. Shlyakhtina, J.C.C. Abrantes, E. Gomes, N.V. Lyskov, A.V. Knotko, O.K. Karyagina, I.V. Kolbanev, L.G. Shcherbakova International Conference on Advanced Nanomaterials, (2018), ind_type:10
Biocompatibility and antimicrobial activity of biphasic calcium phosphate powders doped with metal ions for regenerative medicine Marques C.F.; Olhero S.; Abrantes J.C.C.; Marote A.; Ferreira S.; Vieira S.I.; Ferreira J.M.F. Ceramics International, Volume 43, 17, (2017), 15719-15728 ind_type:2
Corrigendum to “Electrical characterization of La 9.33 Si 2 Ge 4 O 26 oxyapatite for prospective intermediate-temperature solid oxide fuel cells” [Ceram. Int. 43 (2017) 3847–3853] Vitorino N.; Oliveira F.A.C.; Marcelo T.; Abrantes J.C.C.; Trindade B. Ceramics International, Volume 43, 8, (2017), 6636 ind_type:2
Design of NiAl2O4 cellular monoliths for catalytic applications Vitorino N.M.D.; Kovalevsky A.V.; Ferro M.C.; Abrantes J.C.C.; Frade J.R. Materials and Design, Volume 117, (2017), 332-337 ind_type:2
Design of NiAl2O4 cellular monoliths for catalytic applications João C.C. Abrantes Workshop: Boas Práticas na Educação em Ciência e Tecnologia de Materiais e Materiais Cerâmicos, (2017), ind_type:9
Electrical characterization of La9.33Si2Ge4O26 oxyapatite for prospective intermediate-temperature solid oxide fuel cells Vitorino N.; Oliveira F.A.C.; Marcelo T.; Abrantes J.C.C.; Trindade B. Ceramics International, Volume 43, 4, (2017), 3847-3853 ind_type:2
Electrical characterization of La9.33Si2Ge4O26 oxyapatite for prospective intermediate-temperature solid oxide fuel cells J.C.C. Abrantes, E. Gomes, A.N. Shchegolikhin, L.G. Shcherbakova, A.V. Shlyakhtina ECerS2017, (2017), ind_type:10
Injectable MnSr-doped brushite bone cements with improved biological performance Torres P.M.C.; Marote A.; Cerqueira A.R.; Calado A.J.; Abrantes J.C.C.; Olhero S.; Da Cruz E Silva O.A.B.; Vieira S.I.; Ferreira J.M.F. Journal of Materials Chemistry B, Volume 5, 15, (2017), 2775-2787 ind_type:2
Injectable MnSr-doped brushite bone cements with improved biological performance Nuno M.D. Vitorino, João C.C. Abrantes, Jorge R. Frade Materiais 2017, (2017), ind_type:9
Injectable MnSr-doped brushite bone cements with improved biological performance Nivas Babu Selvaraj, Rui Pinho, Joao Abrantes, Ana Senos, Paula Vilarinho Materiais 2017, (2017), ind_type:10
Injectable MnSr-doped brushite bone cements with improved biological performance Nuno M.D. Vitorino, Andrei V. Kovalevsky, Marta C. Ferro, João C.C. Abrantes, Jorge R. Frade Materiais 2017, (2017), ind_type:9
Injectable MnSr-doped brushite bone cements with improved biological performance J.C.C. Abrantes, E. Gomes, L.G. Shcherbakova, A.V. Shlyakhtina Materiais 2017, (2017), ind_type:9
Effect of Pr3+Pr4+ ratio on the oxygen ion transport and thermomechanical properties of the pyrochlore and fluorite phases in the ZrO2–Pr2O3 system Shlyakhtina A.V.; Abrantes J.C.C.; Gomes E.; Shchegolikhin A.N.; Vorobieva G.A.; Maslakov K.I.; Knotko A.V.; Shcherbakova L.G. International Journal of Hydrogen Energy, Volume 41, 23, (2016), 9982-9992 ind_type:2
Influence of Mg-doping, calcium pyrophosphate impurities and cooling rate on the allotropic ???-tricalcium phosphate phase transformations Torres P.M.C.; Abrantes J.C.C.; Kaushal A.; Pina S.; Dobelin N.; Bohner M.; Ferreira J.M.F. Journal of the European Ceramic Society, Volume 36, 3, (2016), 817-827 ind_type:2
Influence of Mg-doping, calcium pyrophosphate impurities and cooling rate on the allotropic ???-tricalcium phosphate phase transformations J.C.C. Abrantes, E. Gomes, L.G. Shcherbakova, A.V. Shlyakhtina E-MRS Spring Meeting 2016, (2016), ind_type:9
Methodology for analysis of the reactivity of coal fly ash using selective dissolution by hydrofluoric acid Reis R.; Ribeiro M.J.P.; Abrantes J.C.C.; Camoes A.; Teixeira E.; Malheiro R. Key Engineering Materials, Volume 711, (2016), 1126-1133 ind_type:2
Quality criteria for phase change materials selection Vitorino N.; Abrantes J.C.C.; Frade J.R. Energy Conversion and Management, Volume 124, (2016), 598-606 ind_type:2
Rheological behavior of paraffin-alumina emulsions and their microstructural effects Sanches M.F.; Vitorino N.M.D.; Abrantes J.C.C.; Frade J.R.; Neto J.B.R.; Hotza D. Materials Science Forum, Volume 869, (2016), 85-90 ind_type:2
Application of electrochemical impedance spectroscopy (EIS) to monitor the corrosion of reinforced concrete: A new approach Ribeiro D.V.; Abrantes J.C.C. Construction and Building Materials, Volume 111, (2016), 98-104 ind_type:2
Self-functionalization of cellular alumina monoliths in hydrothermal conditions Vitorino N.M.D.; Kovalevsky A.V.; Azevedo M.C.C.; Abrantes J.C.C.; Frade J.R. Journal of the European Ceramic Society, Volume 36, 4, (2016), 1053-1058 ind_type:2
Cellular MgAl2O4 spinels prepared by reactive sintering of emulsified suspensions Vitorino N.; Freitas C.; Kovalevsky A.V.; Abrantes J.C.C.; Frade J.R. Materials Letters, Volume 164, (2016), 190-193 ind_type:2
Statistical analysis of grain size distributions in pressure-assisted BaLa4Ti4O15 microstructures Fernandes M.A.C.; Boia J.P.; Selvaraj N.B.; Abrantes J.C.C.; Senos A.M.R.; Vilarinho P.M. Microscopy and Microanalysis, Volume 22, (2016), 36-37 ind_type:2
Statistical analysis of grain size distributions in pressure-assisted BaLa4Ti4O15 microstructures J. C. C. Abrantes, E. Gomes, J. R. Frade Materiais 2015, (2015), ind_type:9
Statistical analysis of grain size distributions in pressure-assisted BaLa4Ti4O15 microstructures N. Vitorino, C. Freitas, M. J. Ribeiro, J.C.C. Abrantes, J. Frade ECerS - 14 th Conference of the European Ceramic Society, (2015), ind_type:10
Burnout effects on cellular ceramics obtained from gelatine gelcasted emulsified suspensions Freitas C.; Vitorino N.; Abrantes J.C.C.; Frade J.R. Journal of the European Ceramic Society, Volume 35, 3, (2015), ind_type:2
Burnout effects on cellular ceramics obtained from gelatine gelcasted emulsified suspensions N. Vitorino, A.V. Kovalevsky, M.J. Ribeiro, J.C.C. Abrantes, J.R. Frade Materiais 2015, (2015), ind_type:9
Burnout effects on cellular ceramics obtained from gelatine gelcasted emulsified suspensions Manuela Fernandes, Nivas B. Selvaraj, João C. C. Abrantes, Ana M. R. Senos, Paula M. Vilarinho Materiais 2015, (2015), ind_type:9
Burnout effects on cellular ceramics obtained from gelatine gelcasted emulsified suspensions Nuno Vitorino, C. Freitas, M.J. Ribeiro, J.C.C. Abrantes, J.R. Frade\\r\\n 1ª Conferência Nacional de Materiais Celulares, U. Aveiro, (2015), ind_type:9
Cellular ceramics by gelatin gelcasting of emulsified suspensions with sunflower oil Sanches M.F.; Vitorino N.; Freitas C.; Abrantes J.C.C.; Frade J.R.; Rodrigues Neto J.B.; Hotza D. Journal of the European Ceramic Society, Volume 35, 9, (2015), 2577-2585 ind_type:2
Cellular ceramics by gelatin gelcasting of emulsified suspensions with sunflower oil Nuno Vitorino, A.V. Kovalevsky,J.C.C. Abrantes, J.R. Frade 1ª Conferência Nacional de Materiais Celulares, U. Aveiro, (2015), ind_type:9
Cellular ceramics by gelatin gelcasting of emulsified suspensions with sunflower oil Nuno Vitorino, Andrei V. Kovalevsky, João C.C. Abrantes and Jorge R. Frade Jornadas CICECO - Nanotechnology … from the Lab to the Industry, (2015), ind_type:10
Cellular ceramics by gelatin gelcasting of emulsified suspensions with sunflower oil N. Vitorino, C. Freitas, M.J. Ribeiro, J. C. C. Abrantes and J. R. Frade Jornadas CICECO - Nanotechnology … from the Lab to the Industry, (2015), ind_type:10
Electrochemical behavior of the pyrochlore- and fluorite-like solid solutions in the Pr2O3-ZrO2 system. Part i Belov D.A.; Shlyakhtina A.V.; Abrantes J.C.C.; Chernyak S.A.; Gasymova G.A.; Karyagina O.K.; Shcherbakova L.G. Solid State Ionics, Volume 271, (2015), 79-85 ind_type:2
Electrochemical behavior of the pyrochlore- and fluorite-like solid solutions in the Pr2O3-ZrO2 system. Part i N. Vitorino, C. Freitas, M.J. Ribeiro, J.C.C. Abrantes, J. Frade Instituto Nacional da Propriedade Industrial Patente de Invenção Nacional nº 107613 (18/08/2015), 107613, (2015), ind_type:12
Electrochemical behavior of the pyrochlore- and fluorite-like solid solutions in the Pr2O3-ZrO2 system. Part i N. Vitorino, A.V. Kovalevsky, J.C.C. Abrantes, J.R. Frade ECerS - 14 th Conference of the European Ceramic Society, (2015), ind_type:9
Extrusion of ceramic emulsions: Preparation and characterization of cellular ceramics Freitas C.; Vitorino N.; Ribeiro M.J.; Abrantes J.C.C.; Frade J.R. Applied Clay Science, Volume 109-110, (2015), 15-21 ind_type:2
Use of Electrochemical Impedance Spectroscopy (EIS) to monitoring the corrosion of reinforced concrete D.V. RIBEIRO, C.A.C. SOUZA, J.C.C. ABRANTES Revista IBRACON de Estruturas e Materiais, (2015), 529-546 ind_type:11
Use of Electrochemical Impedance Spectroscopy (EIS) to monitoring the corrosion of reinforced concrete N. Vitorino, C. Freitas, A. Horovistiz, J.C.C. Abrantes, J. Frade ECerS - 14 th Conference of the European Ceramic Society, (2015), ind_type:10
Hydrothermal synthesis of boehmite in cellular alumina monoliths for catalytic and separation applications Vitorino N.M.D.; Kovalevsky A.V.; Abrantes J.C.C.; Frade J.R. Journal of the European Ceramic Society, Volume 35, 11, (2015), 3119-3125 ind_type:2
Hydrothermal synthesis of boehmite in cellular alumina monoliths for catalytic and separation applications Manuela Fernandes, Nivas Babu Selvaraj, João C. C. Abrantes, Ana M. R. Senos, Paula M. Vilarinho, VII International Materials Symposium, (2015), ind_type:10
Hydrothermal synthesis of boehmite in cellular alumina monoliths for catalytic and separation applications M.A.C. Fernandes, N. B. Selvaraj, J.C.C. Abrantes, P.M. Vilarinho, A.M. R. Senos Jornadas CICECO - Nanotechnology … from the Lab to the Industry, (2015), ind_type:10
Hydrothermal synthesis of boehmite in cellular alumina monoliths for catalytic and separation applications M. Fernandes, N. B. Selvaraj, João C.C. Abrantes, A.M.R. Senos, P. M. Vilarinho 14th Conference of the European Ceramic Society, (2015), ind_type:10
Porous hollow tubes processed by extrusion of ceramic emulsions Vitorino N.; Freitas C.; Ribeiro M.J.; Abrantes J.C.C.; Frade J.R. Applied Clay Science, Volume 105-106, (2015), 60-65 ind_type:2
Porous hollow tubes processed by extrusion of ceramic emulsions Manuela A. C. Fernandes, J.P. Bia, Nivas Babu Selvaraj, João C. C. Abrantes, Ana M. R. Senos, Paula M. Vilarinho Microscopy at the Frontiers of Science, (2015), ind_type:10
Porous hollow tubes processed by extrusion of ceramic emulsions Nuno Vitorino; João Abrantes; Jorge Frade 2nd Edition Workshop -Advanced lightweight materials and structures, (2015), ind_type:9
Effects of Mn-doping on the structure and biological properties of ?-tricalcium phosphate Torres P.M.C.; Vieira S.I.; Cerqueira A.R.; Pina S.; Da Cruz Silva O.A.B.; Abrantes J.C.C.; Ferreira J.M.F. Journal of Inorganic Biochemistry, Volume 136, (2014), 57-66 ind_type:2
Effects of Mn-doping on the structure and biological properties of ?-tricalcium phosphate J.C.C. Abrantes, E. Gomes, J.R. Frade CIMTEC 13th International Ceramic Congress, (2014), ind_type:10
Effect of Nb substitution for Ti on the electrical properties of Yb 2Ti2O7-based oxygen ion conductors Shcherbakova L.G.; Abrantes J.C.C.; Belov D.A.; Nesterova E.A.; Karyagina O.K.; Shlyakhtina A.V. Solid State Ionics, Volume 261, (2014), 131-140 ind_type:2
Effects of processing parameters on cellular ceramics obtained by paraffin emulsified suspensions Sanches M.F.; Vitorino N.; Abrantes J.C.C.; Frade J.R.; Rodrigues Neto J.B.; Hotza D. Ceramics International, Volume 40, 7 PART A, (2014), 9045-9053 ind_type:2
Effects of processing parameters on cellular ceramics obtained by paraffin emulsified suspensions N. Vitorino,J.C.C. Abrantes, J.R. Frade Research Day, (2014), ind_type:10
Extrusion of ceramic emulsions: Plastic behavior Vitorino N.; Freitas C.; Ribeiro M.J.; Abrantes J.C.C.; Frade J.R. Applied Clay Science, Volume 101, (2014), 315-319 ind_type:2
Extrusion of ceramic emulsions: Plastic behavior Andreia Vale, E. Gomes, Manuela Vaz-Velho and João C.C. Abrantes IMMR’14 International Meeting on Marine Research, (2014), ind_type:10
Extrusion of ceramic pastes: An alternative approach to obtain the Benbows model parameters Vitorino N.; Ribeiro M.J.; Abrantes J.C.C.; Labrincha J.A.; Frade J.R. Ceramics International, Volume 40, 9 PART A, (2014), 14543-14547 ind_type:2
Extrusion of ceramic pastes: An alternative approach to obtain the Benbows model parameters N. Vitorino, C. Freitas, J.C.C. Abrantes, J.R. Frade CIMTEC, (2014), ind_type:10
Highly conducting core-shell phase change materials for thermal regulation Vitorino N.; Abrantes J.C.C.; Frade J.R. Applied Thermal Engineering, Volume 66, 1-2, (2014), 131-139 ind_type:2
Cellular ceramics processed by paraffin emulsified suspensions with collagen consolidation Vitorino N.; Abrantes J.C.C.; Frade J.R. Materials Letters, Volume 98, (2013), 120-123 ind_type:2
Gelled graphitegelatin composites for latent heat cold storage Vitorino N.; Abrantes J.C.C.; Frade J.R. Applied Energy, Volume 104, (2013), 890-897 ind_type:2
Solutions for Heat or Cold Discharge from Encapsulated Phase-Change Materials Vitorino N.; Abrantes J.C.C.; Frade J.R. Numerical Heat Transfer, Part B: Fundamentals, Volume 64, 6, (2013), 421-435 ind_type:2
Solutions for Heat or Cold Discharge from Encapsulated Phase-Change Materials Nivas Babu Selvaraj, Manuela Fernandes, Luís Amaral, João C.C. Abrantes, Ana M.R.Senos, Paula M. Vilarinho X CICECO Meeting, (2013), ind_type:10
Solutions for Heat or Cold Discharge from Encapsulated Phase-Change Materials N. Vitorino; J.C.C. Abrantes; J. Frade X CICECO Meeting, (2013), ind_type:10
Solutions for Heat or Cold Discharge from Encapsulated Phase-Change Materials J.C.C. Abrantes; N. Vitorino; J. Frade X CICECO Meeting, (2013), ind_type:10
Solutions for Heat or Cold Discharge from Encapsulated Phase-Change Materials N. B. Selvaraj, M. Fernandes, L. Amaral, J. C. C. Abrantes, A. M. R. Senos, P. M. Vilarinho Materiais 2013, (2013), ind_type:10
Cellular PCMgraphite composites with improved thermal and electrical response Vitorino N.; Abrantes J.C.C.; Frade J.R. Materials Letters, Volume 92, (2013), 100-103 ind_type:2
Cellular PCMgraphite composites with improved thermal and electrical response Nuno Vitorino, João C.C. Abrantes, Jorge R. Frade Reaserch Day, (2013), ind_type:10
Cellular PCMgraphite composites with improved thermal and electrical response Manuel J. Ribeiro e João C. C. Abrantes Kéramica, 324, (2013), 6-14 ind_type:5
Cellular PCMgraphite composites with improved thermal and electrical response J.C.C. Abrantes, D.P. Fagg, E. Gomes, D. Perez-Coll, P. Nuñez, J.R. Frade, Electroceramics XIII, University of Twente, (2012), ind_type:9
Cellular PCMgraphite composites with improved thermal and electrical response J.C.C. Abrantes 5th International Seminar - Advances in Hydrogen Energy Technologies: Key to Sustainable Energy Markets, (2012), ind_type:9
Cellular PCMgraphite composites with improved thermal and electrical response J.C.C. Abrantes, E. Gomes, J.R. Frade E-MRS 2012 Spring Meeting, (2012), ind_type:10
Cellular PCMgraphite composites with improved thermal and electrical response L.G. Shcherbakova, J.C.C. Abrantes, D.A. Belov, O.K. Karyagina, A.V. Shlyakhtina E-MRS 2012 Spring Meeting, (2012), ind_type:10
Grain boundary conductivity of heterogeneous ceria gadolinia Tanaka R.; Oliveira W.S.; Brandao A.; Abrantes J.C.C.; Frade J.R. Electrochimica Acta, Volume 85, (2012), 116-121 ind_type:2
Effect of Red Mud on the Corrosion of Reinforced Concrete Studied by Electrochemical Impedance Spectroscopy D. V. Ribeiro, C. A. D. Rovere, C. A. C. Souza, S. E. Kuri, J. A. Labrincha, J. C. C. Abrantes, M. R. Morelli ISRN Materials Science, Volume 2011, (2011), 1-11 ind_type:5
New oxide-ion conductor Ho2(Ti1.904Ho 0.096)O6.952: Structure and conductivity Abrantes J.C.C.; Savvin S.N.; Shlyakhtina A.V.; Shcherbakova L.G.; Nunez P. Journal of Crystal Growth, Volume 318, 1, (2011), 966-970 ind_type:2
New oxide-ion conductor Ho2(Ti1.904Ho 0.096)O6.952: Structure and conductivity R. Tanaka, W.S. Oliveira, J.C.C.Abrantes, J.R. Frade VIII CICECO Meeting, (2011), ind_type:10
New oxide-ion conductor Ho2(Ti1.904Ho 0.096)O6.952: Structure and conductivity R. Tanaka, W.S. Oliveira, J.C.C.Abrantes, J.R. Frade 18th International Conference on Solid State Ionics, (2011), ind_type:10
Numerical solutions for mixed controlled solidification of phase change materials Vitorino N.; Abrantes J.C.C.; Frade J.R. International Journal of Heat and Mass Transfer, Volume 53, 23-24, (2010), 5335-5342 ind_type:2
Correlation between impedance spectra of bulk ceramics and films with in-plane configuration Ferreira A.A.L.; Abrantes J.C.C.; Frade J.R. Journal of the European Ceramic Society, Volume 30, 2, (2010), 221-225 ind_type:2
Correlation between impedance spectra of bulk ceramics and films with in-plane configuration A.L.Horovistiz, M. V. Boguslavskii, J.C.C. Abrantes, A.V. Shlyakhtina, L.G. Shcherbakova, J.R. Frade 17th International Conference on Solid State Ionics, (2009), ind_type:9
De-convolution of bulk and interfacial contributions based on impedance spectroscopy with external load resistance Ferreira A.A.L.; Horovistiz A.L.; Abrantes J.C.C.; Perez-Coll D.; Nunez P.; Frade J.R. Materials Research Bulletin, Volume 44, 4, (2009), 884-888 ind_type:2
De-convolution of bulk and interfacial contributions based on impedance spectroscopy with external load resistance A.L.Horovistiz, J.C.C. Abrantes, J.R. Frade Hyceltec 2009, (2009), ind_type:9
Effects of composition and frozen-in conditions on bulk and grain boundary conductivities of Yb2Ti2O7-based materials Horovistiz A.L.; Boguslavskii M.V.; Abrantes J.C.C.; Shlyakhtina A.V.; Fagg D.P.; Shcherbakova L.G.; Frade J.R. Solid State Ionics, Volume 180, 11-13, (2009), 774-777 ind_type:2
Effects of composition and frozen-in conditions on bulk and grain boundary conductivities of Yb2Ti2O7-based materials J.C.C. Abrantes, A.L.Horovistiz, M. V. Boguslavskii, A.V. Shlyakhtina, D.P.Fagg, L.G. Shcherbakova, J.R. Frade VI CICECO Meeting, (2009), ind_type:10
Impedance analysis of Sr-substituted CePO4 with mixed protonic and p-type electronic conduction Moral E.G.d.; Fagg D.P.; Chinarro E.; Abrantes J.C.C.; Jurado J.R.; Mather G.C. Ceramics International, Volume 35, 4, (2009), 1481-1486 ind_type:2
Impedance analysis of Sr-substituted CePO4 with mixed protonic and p-type electronic conduction A.L.Horovistiz, M. V. Boguslavskii, J.C.C. Abrantes, A.V. Shlyakhtina, D.P.Fagg, L.G. Shcherbakova, J.R. Frade Electroceramics XI, (2008), ind_type:10
Effects of Yb:Ti ratio on transport properties of Yb2 ± xTi2 ± xO7 ± ? Horovistiz A.L.; Abrantes J.C.C.; Fagg D.P.; Frade J.R. Solid State Ionics, Volume 179, 21-26, (2008), 1046-1049 ind_type:2
Interpretation of impedance spectra based on local minima of imaginary Z vs frequency Abrantes J.C.C.; Ferreira A.A.L.; Horovistiz A.L.; Frade J.R. Electrochimica Acta, Volume 53, 28, (2008), 8222-8227 ind_type:2
Effects of Fe-additions on sintering and transport properties of Yb2Ti2 - yFeyO7 - ? Horovistiz A.L.; Fagg D.P.; Abrantes J.C.C.; Frade J.R. Journal of the European Ceramic Society, Volume 27, 13-15, (2007), 4283-4286 ind_type:2
Effects of Fe-additions on sintering and transport properties of Yb2Ti2 - yFeyO7 - ? J.C.C. Abrantes, D.P.Coll, P.Nuñez, F.M.Figueiredo, J.R. Frade Second International Conference on Physics of Solid State Ionics, (2007), ind_type:9
Order-disorder phase transitions and high-temperature oxide ion conductivity of Er2 xTi2-xO7-? (x = 0, 0.096) Shlyakhtina A.V.; Levchenko A.V.; Abrantes J.C.C.; Bychkov V.Yu.; Korchak V.N.; Rassulov V.A.; Larina L.L.; Karyagina O.K.; Shcherbakova L.G. Materials Research Bulletin, Volume 42, 4, (2007), 742-752 ind_type:2
Reducibility of Ce1-xGdxO2-? in prospective working conditions Perez-Coll D.; Marrero-Lopez D.; Ruiz-Morales J.C.; Nunez P.; Abrantes J.C.C.; Frade J.R. Journal of Power Sources, Volume 173, 1, (2007), 291-297 ind_type:2
Reducibility of Ce1-xGdxO2-? in prospective working conditions A.L.Horovistiz, J.C.C. Abrantes, D.P.Fagg, J.R. Frade Electroceramica, (2007), ind_type:10
Reducibility of Ce1-xGdxO2-? in prospective working conditions A.L.Horovistiz, J.C.C. Abrantes, D.P.Fagg, J.R. Frade 16th International Conference on Solid State Ionics, (2007), ind_type:10
New oxide-ion conductors Ln2 xTi2-xO7-x2 (Ln = Dy - Lu; x=0.096) Shlyakhtina A.V.; Abrantes J.C.C.; Levchenko A.V.; Stefanovich S.Yu.; Knotko A.V.; Larina L.L.; Shcherbakova L.G. Materials Science Forum, Volume 514-516, PART 1, (2006), 422-426 ind_type:2
New oxide-ion conductors Ln2 xTi2-xO7-x2 (Ln = Dy - Lu; x=0.096) E. Aparo, J.C.C. Abrantes Cerâmica Industrial, Volume 11, 1, (2006), 18-20 ind_type:5
New oxide-ion conductors Ln2 xTi2-xO7-x2 (Ln = Dy - Lu; x=0.096) L.Horovistiz, D.P. Fagg, J.C.C. Abrantes, J.R. Frade Electroceramics X, International Conference on Electroceramics, (2006), ind_type:9
Synthesis and electrical transport properties of Lu2 xTi2-xO7-x2 oxide-ion conductors Shlyakhtina A.V.; Abrantes J.C.C.; Levchenko A.V.; Knot'ko A.V.; Karyagina O.K.; Shcherbakova L.G. Solid State Ionics, Volume 177, 13-14, (2006), 1149-1155 ind_type:2
Electrical characterization of mullite bodies containing Al-rich anodizing sludge Ribeiro M.J.; Abrantes J.C.C.; Labrincha J.A. Materials Science Forum, Volume 514-516, PART 2, (2006), 1726-1730 ind_type:2
Impedance spectroscopy evolution upon sintering of Al-rich anodising sludge-based extruded bodies Ribeiro M.J.; Abrantes J.C.; Labrincha J.A. Boletin de la Sociedad Espanola de Ceramica y Vidrio, Volume 45, 4, (2006), 300-303 ind_type:2
Ionic and electronic conductivity of Yb2 xTi2-xO7-x2 materials Abrantes J.C.C.; Levchenko A.; Shlyakhtina A.V.; Shcherbakova L.G.; Horovistiz A.L.; Fagg D.P.; Frade J.R. Solid State Ionics, Volume 177, 19-25 SPEC. ISS., (2006), 1785-1788 ind_type:2
Microstructure and electrical conductivity of Yb2 xTi 2-xO7-x2 materials Levchenko A.; Abrantes J.C.C.; Shlyakhtina A.V.; Shcherbakova L.G.; Horovistiz A.L.; Frade J.R. Materials Science Forum, Volume 514-516, PART 1, (2006), 417-421 ind_type:2
Microstructure and electrical conductivity of Yb2 xTi 2-xO7-x2 materials F. Pombo, E. Aparo, J.C.C. Abrantes Proceedings of Cumulus Lisbon - Pride & Pre-Design – The Cultural Heritage and the Science of Design, (2005), ind_type:11
Microstructure and electrical conductivity of Yb2 xTi 2-xO7-x2 materials M.J. Ribeiro, J.C.C. Abrantes, J.A. Labrincha XLV Congreso SECV, (2005), ind_type:10
Effects of firing conditions and addition of Co on bulk and grain boundary properties of CGO Perez-Coll D.; Nunez P.; Abrantes J.C.C.; Fagg D.P.; Kharton V.V.; Frade J.R. Solid State Ionics, Volume 176, 37-38, (2005), 2799-2805 ind_type:2
Effects of firing conditions and addition of Co on bulk and grain boundary properties of CGO E. Aparo, J.C.C. Abrantes, A. Correia Diálogos em Design, (2005), ind_type:9
Kinetics of phase transformations for constant heating rate occurring close to the thermodynamic transition Frade J.R.; Kharton V.V.; Marrero-Lopez D.; Nunez P.; Abrantes J.C.C. Thermochimica Acta, Volume 435, 1, (2005), 85-91 ind_type:2
Kinetics of phase transformations for constant heating rate occurring close to the thermodynamic transition J.C.C. Abrantes, A. Shlyakhtina, L. Shcherbakova, A. Levchenko, J. Frade, A.L. Horovistiz MATERIAIS 2005 - III International Materials Symposium and XII Portuguese Materials Society Meeting, (2005), ind_type:10
Synthesis and conductivity of Yb2Ti2O7 nanoceramics Shlyakhtina A.V.; Abrantes J.C.C.; Larina L.L.; Shcherbakova L.G. Solid State Ionics, Volume 176, 17-18, (2005), 1653-1656 ind_type:2
Synthesis and conductivity of Yb2Ti2O7 nanoceramics M.J. Ribeiro, J.C.C. Abrantes, J.A. Labrincha MATERIAIS 2005 - III International Materials Symposium and XII Portuguese Materials Society Meeting, (2005), ind_type:10
Predicting processing-sintering-related properties of mullite-alumina ceramic bodies based on Al-rich anodising sludge by impedance spectroscopy Ribeiro M.J.; Abrantes J.C.C.; Ferreira J.M.; Labrincha J.A. Journal of the European Ceramic Society, Volume 24, 15-16, (2004), 3841-3848 ind_type:2
Predicting processing-sintering-related properties of mullite-alumina ceramic bodies based on Al-rich anodising sludge by impedance spectroscopy J.C.C.Abrantes, A.A.L. Ferreira, J.R.Frade OSSEP Workshop - Defect Chemistry, (2004), ind_type:10
Predicting processing-sintering-related properties of mullite-alumina ceramic bodies based on Al-rich anodising sludge by impedance spectroscopy Marrero-Lopez D.; Ruiz-Morales J.C.; Perez-Coll D.; Nunez P.; Abrantes J.C.C.; Frade J.R. Journal of Solid State Electrochemistry, Volume 8, 9, (2004), 638-643 ind_type:2
Predicting processing-sintering-related properties of mullite-alumina ceramic bodies based on Al-rich anodising sludge by impedance spectroscopy J.C.C.Abrantes, A.A.L. Ferreira, J.R.Frade OSSEP, Final Meeting, (2004), ind_type:10
Synthesis and characterization of La2Mo2O9 obtained from freeze-dried precursors Marrero-Lopez D.; Ruiz-Morales J.C.; Nunez P.; Abrantes J.C.C.; Frade J.R. Journal of Solid State Chemistry, Volume 177, 7, (2004), 2378-2386 ind_type:2
Synthesis and characterization of La2Mo2O9 obtained from freeze-dried precursors J.C.C. Abrantes, J.R. Frade Patras Conference on "Solid-State Ionics - Transport Properties, (2004), ind_type:9
Synthesis and characterization of La2Mo2O9 obtained from freeze-dried precursors A.A.L. Ferreira, J.C.C. Abrantes e J.R. Frade The Electroceramics IX-2004, (2004), ind_type:10
Synthesis and characterization of La2Mo2O9 obtained from freeze-dried precursors J.C.C.Abrantes, J.R. Frade E-MRS 2004 SPRING MEETING, Symposium K - Solid State Ionics: High Temperature Vs. Low Temperature Defect Chemistry, (2004), ind_type:9
Synthesis and characterization of La2Mo2O9 obtained from freeze-dried precursors D.Pérez-Coll, P. Nuñez, J.C.C. Abrantes, J.R. Frade OSSEP, Final Meeting, (2004), ind_type:9
Effects of sintering additives on the mixed transport properties of ceria-based materials under reducing conditions Perez-Coll D.; Nunez P.; Marrero-Lopez D.; Abrantes J.C.C.; Frade J.R. Journal of Solid State Electrochemistry, Volume 8, 9, (2004), 644-649 ind_type:2
Effects of sintering additives on the mixed transport properties of ceria-based materials under reducing conditions J.C.C.Abrantes, J.R.Frade 14th International Conference On Solid State Ionics, (2003), ind_type:10
Effects of sintering additives on the mixed transport properties of ceria-based materials under reducing conditions J.C.C. Abrantes and J.R Frade OSSEP Meeting - Ionic and Mixed Conductors: Methods and Processes, (2003), ind_type:9
Effects of sintering additives on the mixed transport properties of ceria-based materials under reducing conditions D. Pérez-Coll, P.Nuñez, J.C.C.Abrantes, J.R.Frade OSSEP Meeting - Ionic and Mixed Conductors: Methods and Processes, (2003), ind_type:9
Effects of sintering additives on the mixed transport properties of ceria-based materials under reducing conditions David Marreo-López, P.Nuñez, J.C.C.Abrantes, J.R.Frade OSSEP Meeting - Ionic and Mixed Conductors: Methods and Processes, (2003), ind_type:9
Conductivity of CGO and CSO ceramics obtained from freeze-dried precursors Perez-Coll D.; Nunez P.; Frade J.R.; Abrantes J.C.C. Electrochimica Acta, Volume 48, 11, (2003), 1551-1557 ind_type:2
Electronic transport in Ce0.8Sm0.2O1.9-? ceramics under reducing conditions Abrantes J.C.C.; Perez-Coll D.; Nunez P.; Frade J.R. Electrochimica Acta, Volume 48, 19, (2003), 2761-2766 ind_type:2
On the use of multichannel data acquisition of impedance spectra Abrantes J.C.C.; Perez-Coll D.; Nunez P.; Frade J.R. Ionics, Volume 9, 5-6, (2003), 370-374 ind_type:2
The effect of cobalt oxide sintering aid on electronic transport in Ce0.80Gd0.20O2-? electrolyte Fagg D.P.; Abrantes J.C.C.; Perez-Coll D.; Nunez P.; Kharton V.V.; Frade J.R. Electrochimica Acta, Volume 48, 8, (2003), 1023-1029 ind_type:2
Behavior of strontium titanate ceramics in reducing conditions suggesting enhanced conductivity along grain contacts Abrantes J.C.C.; Labrincha J.A.; Frade J.R. Journal of the European Ceramic Society, Volume 22, 9-10, (2002), 1683-1691 ind_type:2
Behavior of strontium titanate ceramics in reducing conditions suggesting enhanced conductivity along grain contacts J.C.C. Abrantes, D. Pérez-Coll, P. Núñez-Coello, J.R. Frade OSSEP Newsletter Issue 1, Project G0136SV, (2002), ind_type:5
Impedance spectroscopy study of niobium-doped strontium titanate ceramics Abrantes J.C.C.; Feighery A.; Ferreira A.A.L.; Labrincha J.A.; Frade J.R. Journal of the American Ceramic Society, Volume 85, 11, (2002), 2745-2752 ind_type:2
Impedance spectroscopy study of niobium-doped strontium titanate ceramics D. Pérez-Coll, P. Núñez, J. Frade, J.C.C. Abrantes Proceedings of Processing of and Microstructure-Property Relations in SOFC Components and Ceramic Gas-Separation Membranes , (2002), ind_type:11
Impedance spectroscopy study of niobium-doped strontium titanate ceramics M.J. Ribeiro, J.C.C. Abrantes Kéramica , Volume 245, Jan-Fev, (2001), 15-20 ind_type:5
Microstructural effects on the electrical behaviour of SrTi0.95Nb0.05O3 ? materials on changing from reducing to oxidising conditions Feighery A.J.; Abrantes J.C.C.; Labrincha J.A.; Ferreira J.M.F.; Frade J.R. Sensors and Actuators, B: Chemical, Volume 75, 1-2, (2001), 88-94 ind_type:2
Microstructural effects on the electrical behaviour of SrTi0.95Nb0.05O3 ? materials on changing from reducing to oxidising conditions M.J. Ribeiro, J.C.C. Abrantes Cerâmica Industrial, Volume 6, 2, (2001), 7-11 ind_type:5
Microstructural effects on the electrical behaviour of SrTi0.95Nb0.05O3 ? materials on changing from reducing to oxidising conditions A.A.L. Ferreira, J.C.C. Abrantes, J.R. Frade 8th Euroconference on Science and Technology of Ionics, (2001), ind_type:9
Microstructural effects on the electrical behaviour of SrTi0.95Nb0.05O3 ? materials on changing from reducing to oxidising conditions J.R. Frade, J.C.C. Abrantes, F.M. Figueiredo, V.V. Kharton, E. Chinarro, M.T. Colomer, J.R. Jurado , COST 525 - Advanced Electroceramics: Grain Boundary Engineering , (2001), ind_type:9
Representations of impedance spectra of ceramics. Part II. Spectra of polycrystalline SrTiO3 Abrantes J.C.C.; Labrincha J.A.; Frade J.R. Materials Research Bulletin, Volume 35, 6, (2000), 965-976 ind_type:2
Alternative representation of impedance spectra of ceramics Abrantes J.C.C.; Labrincha J.A.; Frade J.R. Materials Research Bulletin, Volume 35, 5, (2000), 727-740 ind_type:2
Alternative representation of impedance spectra of ceramics D. P. Fagg, J. C. C. Abrantes, J. A. Labrincha and J. R. Frade Electroceramics VII, (2000), ind_type:9
Applicability of the brick layer model to describe the grain boundary properties of strontium titanate ceramics Abrantes J.C.C.; Labrincha J.A.; Frade J.R. Journal of the European Ceramic Society, Volume 20, 10, (2000), 1603-1609 ind_type:2
Applicability of the brick layer model to describe the grain boundary properties of strontium titanate ceramics A.J. Feighery, J.C.C. Abrantes, J.A. Labrincha, J.R. Frade The 8th International Meeting on Chemical Sensors, (2000), ind_type:10
Oxygen stoichiometry of Sr-0.97(Ti,Fe)O3-delta materials Ferreira A.A.L.; Abrantes J.C.C.; Jurado J.R.; Frade J.R. Solid State Ionics, Volume 135, 1-4, (2000), 761-764 ind_type:2
Representations of impedance spectra of ceramics. Part I. Simulated study cases Abrantes J.C.C.; Labrincha J.A.; Frade J.R. Materials Research Bulletin, Volume 35, 6, (2000), 955-964 ind_type:2
Representations of impedance spectra of ceramics. Part I. Simulated study cases J.C.C. Abrantes, J.A. Labrincha, J.R. Frade Conferência sobre a Investigação no Ensino Superior Politécnico, (1999), ind_type:10
Representations of impedance spectra of ceramics. Part I. Simulated study cases A.A.L. Ferreira, J.C.C. Abrantes, J.A. Abrantes, J.R. Frade 12th International Conference on Solid State Ionics, (1999), ind_type:10
Evaluation of SrTi1-yNbyO3+? materials for gas sensors Abrantes J.C.C.; Labrincha J.A.; Frade J.R. Sensors and Actuators, B: Chemical, Volume 56, 3, (1999), 198-205 ind_type:2
Evaluation of SrTi1-yNbyO3+? materials for gas sensors A.A.L. Ferreira, J.C.C. Abrantes, J.R. Frade Conferência sobre a Investigação no Ensino Superior Politécnico, (1999), ind_type:10
Onset of resistive internal interfaces in SrTi0.95Nb 0.05O3 ? materials on changing from reducing to oxidising conditions and on cooling Abrantes J.C.C.; Feighery A.J.; Labrincha J.A.; Frade J.R. Ionics, Volume 5, 5-6, (1999), 410-414 ind_type:2
Oxygen losses and electrical conductivity of SrTi1?yNbyO3+? materials Ferreira A.; Abrantes J.; Labrincha J.; Frade J. Journal of the European Ceramic Society, Volume 19, 6-7, (1999), 773-776 ind_type:2
Oxygen losses and electrical conductivity of SrTi1?yNbyO3+? materials A.J. Feighery, J.C.C. Abrantes, J.A. Labrincha, J.R. Frade Royal Society of Chemistry Group Christmas Meeting, (1999), ind_type:10
Oxygen losses and electrical conductivity of SrTi1?yNbyO3+? materials A.A.L. Ferreira, J.C.C. Abrantes, D. Fagg, J.A. Abrantes, J.R. Frade 12th International Conference on Solid State Ionics, (1999), ind_type:10
Oxygen losses and electrical conductivity of SrTi1-yNbyO3 delta materials Ferreira A.; Abrantes J.; Labrincha J.; Frade J. Journal of the European Ceramic Society, Volume 19, 6-7, (1999), 773-776 ind_type:2
Oxygen losses and electrical conductivity of SrTi1-yNbyO3 delta materials A.A.L. Ferreira, J.C.C. Abrantes, J.A. Labrincha, J.R. Frade 12th International Conf. on Solid State Ionics, (1999), ind_type:9
Oxygen losses and electrical conductivity of SrTi1-yNbyO3 delta materials A.A.L. Ferreira, J.C.C. Abrantes, J.A. Labrincha, J.R. Frade Electroceramics VI - 98, (1998), ind_type:10
Oxygen losses and electrical conductivity of SrTi1-yNbyO3 delta materials A.A.L. Ferreira, J.C.C. Abrantes, J.A. Labrincha, J.R. Frade 5th Euroconference on Solid State Ionics Benalmadena, Espanha, (1998), ind_type:11
Oxygen losses and electrical conductivity of SrTi1-yNbyO3 delta materials A.A.L. Ferreira, J.C.C. Abrantes, J.A. Labrincha, J.R. Frade 5th Euroconference on Solid State ionics, (1998), ind_type:9
Oxygen losses and electrical conductivity of SrTi1-yNbyO3 delta materials A.A.L. Ferreira, J.C.C. Abrantes, J.A. Labrincha, J.R. Frade 4th Euroconference on Solid State Ionics, (1997), ind_type:9
Electrical conductivity of Sr1-xTiO3-? materials Abrantes J.C.C.; Ferreira A.A.L.; Labrincha J.A.; Frade J.R. Ionics, Volume 3, 5-6, (1997), 436-441 ind_type:2
Combined effects of a-site deficiency and dopant content on the transport properties of Nb-doped strontium titanate Abrantes J.C.C.; Labrincha J.A.; Frade J.R. Ionics, Volume 3, 1-2, (1997), 16-22 ind_type:2
Combined effects of a-site deficiency and dopant content on the transport properties of Nb-doped strontium titanate J.C.C. Abrantes, C.M.S. Rodrigues, J.A. Labrincha, F.M.B. Marques e J.R.Frade British Ceramic Proceedings Nº56 - Ceramic Oxygen Ion Conductors and Their Technological Applications, (1996), 125-135 ind_type:11
Combined effects of a-site deficiency and dopant content on the transport properties of Nb-doped strontium titanate J.C.C. Abrantes, J.A. Labrincha, J.R. Frade Electroceramics V, (1996), Vol 2,147-150 ind_type:11
Combined effects of a-site deficiency and dopant content on the transport properties of Nb-doped strontium titanate J.C.C. Abrantes, C.M.S. Rodrigues, J.A. Labrincha, J.R. Frade e F.M.B. Marques Eight CimTec - Word Ceramic Congress, (1994), ind_type:10
Combined effects of a-site deficiency and dopant content on the transport properties of Nb-doped strontium titanate Abrantes, João Carlos de Castro, M.T. Hernandez, Jurado, J.R., DURAN, P, Marques, FMB European Ceramic Society Conference II , (1993), 2103--2107 ind_type:11
Combined effects of a-site deficiency and dopant content on the transport properties of Nb-doped strontium titanate M. Gonzalez, J.R. Jurado, C. Moure, P, Duran, F.M.B. Marques, J.C.C. Abrantes Euro-Ceramics II, (1993), V.3 pp. 2097-2101 ind_type:11
Combined effects of a-site deficiency and dopant content on the transport properties of Nb-doped strontium titanate J.C.C. Abrantes, F.M.B. Marques, J.R. Frade Third Euro-Ceramics, (1993), Vol.2, pp 323-328 ind_type:11
Combined effects of a-site deficiency and dopant content on the transport properties of Nb-doped strontium titanate J.A. Labrincha, F.M.B. Marques, J.R. Frade, J.C.C. Abrantes Third Euro-Ceramics, (1993), Vol.2 pp 329-334 ind_type:11
Combined effects of a-site deficiency and dopant content on the transport properties of Nb-doped strontium titanate J.C.C. Abrantes, F.M.B. Marques, J.R. Frade Euro-Ceramics II V.3, (1993), V.3 pp. 2167-2171 ind_type:11
Evaluation of ionic transport number of CeO2 doped Y-TZP and PSZ ceramics with alumina additions Hernandez M.T.; Jurado J.R.; Duran P.; Abrantes J.C.C.; Marques F.M.B. Solid State Ionics, Volume 50, Solid State Ionics, (1992), 167-173 ind_type:2
Evaluation of ionic transport number of CeO2 doped Y-TZP and PSZ ceramics with alumina additions Abrantes, João Carlos de Castro, Maria Gonzalez, José Ramon Jurado, Carlos Moure, Pedro Duran, Fernando M.B. Marques Bol. Soc. Esp. Cer. y Vidrio, Volume 30, 6, (1991), 476--479 ind_type:5
Evaluation of ionic transport number of CeO2 doped Y-TZP and PSZ ceramics with alumina additions Abrantes, João Carlos de Castro, João A. Labrincha, Fernando M.B. Marques, Frade, J.R. Seven CimTec - Word Ceramic Congress, (1991), 2265--2274 ind_type:11
Evaluation of ionic transport number of CeO2 doped Y-TZP and PSZ ceramics with alumina additions R.M.C. Marques, J.C.C. Abrantes, J.R. Frade, F.M.B. Marques XXX Congresso Nacional de Ceramica y Vidrio, (1990), ind_type:10

Select a project type

Name
SUNRISE \| Smaller (strategic) Universities Network for Regional Innovative and Sustainable Evolution \| João Carlos de Castro Abrantes \| From: 2025-01-01 To: 2028-12-31 João Carlos de Castro Abrantes ind_type:22
Norte em Movimento \| Rumo à Sustentabilidade Energética \| Impulsionar a mobilidade sustentável e a transição energética para um futuro mais verde e inovador no Norte de Portugal NORTE2030-FEDER-02931000 \| João Carlos de Castro Abrantes \| From: 2025-04-01 To: 2028-03-31 João Carlos de Castro Abrantes ind_type:25
PREMI \| Plataforma Regional Mar Inteligente \| João Carlos de Castro Abrantes \| From: 2025-05-02 To: 2027-12-31 João Carlos de Castro Abrantes ind_type:25
Maintenance4Sea 4.0 \| Desenvolvimento de metodologias e tecnologias para manutenção preditiva em sistemas de produção de energia offshore NORTE2030-FEDER-01818800 \| João Carlos de Castro Abrantes \| From: 2025-01-01 To: 2027-12-31 João Carlos de Castro Abrantes ind_type:25
Viana S+T+ARTS Centre \| The Place for Arts-Driven Blue Innovation EUI-Innovative Actions 01-087- EU-FEDER \| Pedro da Silva Delgado \| From: 2024-03-01 To: 2027-08-31 João Carlos de Castro Abrantes ind_type:22
AOWINDE \| Atlantic Offshore Wind Energy POCTEP - AOWINDE - 0073_AOWINDE_1_E \| João Carlos de Castro Abrantes \| From: 2023-07-01 To: 2026-06-30 João Carlos de Castro Abrantes ind_type:22
FiberRec \| End-of-life building materials recovery: processing of fibers from a circular economy perspective 2022.09272.PTDC \| António José Candeias Curado \| From: 2023-03-01 To: 2025-02-28 João Carlos de Castro Abrantes ind_type:25
3DPrint \| Concepção e Impressão 3D de Materiais e Sistemas Mecânicos Sustentáveis proMetheus 8/2022 \| César Miguel Almeida Vasques \| From: 2022-02-01 To: 2023-04-30 João Carlos de Castro Abrantes ind_type:23
ReSer \| Reciclagem de sistemas de produção de energia renovável proMetheus 4/2021 \| Eduarda Manuela Carvalho Lopes Gomes Pereira de Lima \| From: 2022-09-01 To: 2023-02-28 João Carlos de Castro Abrantes ind_type:23
Healing \| Regeneração de materiais em pilhas de combustível de óxido sólido POCI-01-0145-FEDER-032036 \| João Carlos de Castro Abrantes \| From: 2018-05-01 To: 2022-04-30 João Carlos de Castro Abrantes ind_type:25
ValorMar PPS3 \| Valorização integral dos recursos marinhos: potencial, inovação tecnológica e novas aplicações – PPS3 Fracionamento e caracterização morfológica, química e cristalográfica da fração inor POCI-01-0247-FEDER-024517 \| João Carlos de Castro Abrantes \| From: 2017-10-01 To: 2021-07-31 João Carlos de Castro Abrantes ind_type:25
FCT Capes \| Development of geopolymeric low energy binders from industrial wastes as coatings passively acting in the control of indoor air quality FCT/CAPES 88887.125458/2016-00 \| Manuel Joaquim Peixoto Marques Ribeiro \| From: 2016-02-01 To: 2018-02-28 João Carlos de Castro Abrantes ind_type:25
Covos \| Desenvolvimento de novos covos para apanha marítima n.º 31-04-01-FEP-0216 \| João Carlos de Castro Abrantes \| From: 2013-10-01 To: 2015-09-01 João Carlos de Castro Abrantes ind_type:25
THERMICS: \| Cellular PCM-based composites with enhanced thermal conduction and shape stabilization FCT, PTDC/CTM-ENE/2073/2012 \| João Carlos de Castro Abrantes \| From: 2013-06-01 To: 2015-09-01 João Carlos de Castro Abrantes ind_type:25
Funcional Mortar \| Study of functional mortars for a sustainable construction \| João Carlos de Castro Abrantes \| From: 2008-01-01 To: 2011-03-31 João Carlos de Castro Abrantes ind_type:25
INTER ION \| Development of new interstitial oxide-ion conductors for effective oxygen separation and conversion of the hydrocarbons \| João Carlos de Castro Abrantes \| From: 2005-01-01 To: 2008-06-30 João Carlos de Castro Abrantes ind_type:25
SynGas \| Novas Membranas Cerâmicas para Produção de Gás de Síntese \| João Carlos de Castro Abrantes \| From: 2005-05-01 To: 2008-04-30 João Carlos de Castro Abrantes ind_type:25
CGO Materials \| Transport properties and electrochemical applications of ceria-based nanomaterials \| João Carlos de Castro Abrantes \| From: 2003-03-01 To: 2006-08-31 João Carlos de Castro Abrantes ind_type:25
SOFC Membranes \| Materials for Selective Oxygen Separation Membranes \| João Carlos de Castro Abrantes \| From: 2001-10-01 To: 2002-03-01 João Carlos de Castro Abrantes ind_type:25

Industry, Innovation and Infrastructure

Publications: 81

Projects: 9

External Services: 9

Affordable and Clean Energy

Publications: 52

Projects: 8

External Services: 8

Climate Action

Publications: 8

Projects: 3

External Services: 4

Sustainable Cities and Communities

Publications: 3

Projects: 4

External Services: 4

Responsible Consuption and Production

Publications: 1

Life Below Water

Projects: 1

External Services: 1

João Carlos de Castro Abrantes

Short biography

Fineness Optimization of Waste Glass Powder as a Sustainable Alternative to Fly Ash in Cementitious Mixtures

Effect of heat treatment on tensile properties and fracture behavior of LPBF-manufactured Cu–10Al and Cu–10Sn alloys

A Brief Review on Biomimetics 3D Printing Design

A Brief Review on Biomimetics 3D Printing Design

On the Electrical Resistivity Measurement Methods and Properties of Conductive 3D-Printing PLA Filaments

Synergistic effect of high-energy milling and organic intercalation on the kaolin properties and structural evolution

Technology overview and investigation of the quality of a 3D-printed maraging steel demonstration part

Study of Mg doping on the zirconium and lanthanide sites of Ln2Zr2O7 (Ln = Sm, Gd) pyrochlores

Recovery of End-of-Life Building Materials: Thermal Decomposition and Phase Transformation of Chrysotile in Asbestos-Containing Fiber Cement Boards

Magnetic and thermo-responsive microparticles based on calcium phosphates with high potential to produce structures for bone regeneration and local hyperthermia

Magnetic and thermo-responsive microparticles based on calcium phosphates with high potential to produce structures for bone regeneration and local hyperthermia

Magnetic and thermo-responsive microparticles based on calcium phosphates with high potential to produce structures for bone regeneration and local hyperthermia

Magnetic and thermo-responsive microparticles based on calcium phosphates with high potential to produce structures for bone regeneration and local hyperthermia

Magnetic and thermo-responsive microparticles based on calcium phosphates with high potential to produce structures for bone regeneration and local hyperthermia

Magnetic and thermo-responsive microparticles based on calcium phosphates with high potential to produce structures for bone regeneration and local hyperthermia

Structural analysis of selective laser melted copper-tin alloy

Effect of yttrium ion on the space charge potential across grain boundaries regions of gadolinia-doped ceria electrolytes

Design and performance analysis of a High Field Side antenna for Plasma Position Reflectometry control on DTT

Characterization and processing of kaolin from southern Brazil for potential strategic application in the porcelain stoneware tiles manufacturing

The Use of Asbestos and Its Consequences: An Assessment of Environmental Impacts and Public Health Risks

The Use of Asbestos and Its Consequences: An Assessment of Environmental Impacts and Public Health Risks

Design and performance analysis of a High Field Side antenna for Plasma Position Reflectometry control on DTT

Design and performance analysis of a High Field Side antenna for Plasma Position Reflectometry control on DTT

Defect chemistry of pyrochlore Pr2O3-ZrO2 system: the relevant thermodynamic parameters

Defect chemistry of pyrochlore Pr2O3-ZrO2 system: the relevant thermodynamic parameters

Defect chemistry of pyrochlore Pr2O3-ZrO2 system: the relevant thermodynamic parameters

Defect chemistry of pyrochlore Pr2O3-ZrO2 system: the relevant thermodynamic parameters

Defect chemistry of pyrochlore Pr2O3-ZrO2 system: the relevant thermodynamic parameters

Defect chemistry of pyrochlore Pr2O3-ZrO2 system: the relevant thermodynamic parameters

Overview of Selective Laser Melting for Industry 5.0: Toward Customizable, Sustainable, and Human-Centric Technologies

Overview of Selective Laser Melting for Industry 5.0: Toward Customizable, Sustainable, and Human-Centric Technologies

Plataformas digitais como estratégia para a desmaterialização do campus académico

pH-Dependent Synthesis of Pure-Phase BiI3 and BiOI by Electrodeposition**

pH-Dependent Synthesis of Pure-Phase BiI3 and BiOI by Electrodeposition**

pH-Dependent Synthesis of Pure-Phase BiI3 and BiOI by Electrodeposition**

pH-Dependent Synthesis of Pure-Phase BiI3 and BiOI by Electrodeposition**

pH-Dependent Synthesis of Pure-Phase BiI3 and BiOI by Electrodeposition**

Additive Manufacturing Integrated Technologies Applied to Human Machine Interfaces: An Industry 5.0 Overview

Additive Manufacturing Integrated Technologies Applied to Human Machine Interfaces: An Industry 5.0 Overview

Additive Manufacturing Integrated Technologies Applied to Human Machine Interfaces: An Industry 5.0 Overview

Additive Manufacturing Integrated Technologies Applied to Human Machine Interfaces: An Industry 5.0 Overview

Additive Manufacturing Integrated Technologies Applied to Human Machine Interfaces: An Industry 5.0 Overview

Additive Manufacturing Integrated Technologies Applied to Human Machine Interfaces: An Industry 5.0 Overview

Hydration and phase development of recycled cement

Hydration and phase development of recycled cement

Valorisation of Recycled Cement Paste: Feasibility of a Short-Duration Carbonation Process

Study of oxygen-ion conductivity and luminescence in the ZrO2 – Nd2O3 system: Impact of local heterogeneity

Study of oxygen-ion conductivity and luminescence in the ZrO2 – Nd2O3 system: Impact of local heterogeneity

Study of oxygen-ion conductivity and luminescence in the ZrO2 – Nd2O3 system: Impact of local heterogeneity

Electrochemical Synthesis of Bismuth Iodide and Bismuth Oxyiodide

Electrochemical Synthesis of Bismuth Iodide and Bismuth Oxyiodide

Electrochemical Synthesis of Bismuth Iodide and Bismuth Oxyiodide

Electrochemical Synthesis of Bismuth Iodide and Bismuth Oxyiodide

Electrochemical Synthesis of Bismuth Iodide and Bismuth Oxyiodide

Electrochemical Synthesis of Bismuth Iodide and Bismuth Oxyiodide

Effective production of multifunctional magnetic-sensitive biomaterial by an extrusion-based additive manufacturing technique

Effective production of multifunctional magnetic-sensitive biomaterial by an extrusion-based additive manufacturing technique

Combined pretreatment by ultrasound and struvite precipitation of raw substrates: A strategy to overcome cn ratio unbalance in nitrogen-rich anaerobic co-digestion systems

Combined pretreatment by ultrasound and struvite precipitation of raw substrates: A strategy to overcome cn ratio unbalance in nitrogen-rich anaerobic co-digestion systems

Combined pretreatment by ultrasound and struvite precipitation of raw substrates: A strategy to overcome cn ratio unbalance in nitrogen-rich anaerobic co-digestion systems

Structure, conductivity and magnetism of orthorhombic and fluorite polymorphs in MoO3–Ln2O3 (Ln = Gd, Dy, Ho) systems

Structure, conductivity and magnetism of orthorhombic and fluorite polymorphs in MoO3–Ln2O3 (Ln = Gd, Dy, Ho) systems

Structure, conductivity and magnetism of orthorhombic and fluorite polymorphs in MoO3-Ln2O3 (Ln = Gd, Dy, Ho) systems

Evolution of oxygen-ion and proton conductivity in Ca-doped Ln2Zr2O7 (Ln = Sm, Gd), located near pyrochlore-fluorite phase boundary

Evolution of oxygen-ion and proton conductivity in Ca-doped Ln2Zr2O7 (Ln = Sm, Gd), located near pyrochlore-fluorite phase boundary

Structure and conductivity of Nd6MoO12 -based potential electron-proton conductors under dry and wet redox conditions

Surface functionalization of cuttlefish bone-derived biphasic calcium phosphate scaffolds with polymeric coatings

Study of the dust produced in rehabilitation works

Study of the dust produced in rehabilitation works

Study of the dust produced in rehabilitation works

Novel sintering-free scaffolds obtained by additive manufacturing for concurrent bone regeneration and drug delivery: Proof of concept

Novel sintering-free scaffolds obtained by additive manufacturing for concurrent bone regeneration and drug delivery: Proof of concept

Novel sintering-free scaffolds obtained by additive manufacturing for concurrent bone regeneration and drug delivery: Proof of concept

Novel sintering-free scaffolds obtained by additive manufacturing for concurrent bone regeneration and drug delivery: Proof of concept

Novel sintering-free scaffolds obtained by additive manufacturing for concurrent bone regeneration and drug delivery: Proof of concept

Influence of the CaP ratio and cooling rate on the allotropic ???-tricalcium phosphate phase transformations

Influence of the CaP ratio and cooling rate on the allotropic ???-tricalcium phosphate phase transformations

Linking sintering stresses to nano modification in the microstructure of BaLa 4 Ti 4 O 15 by transmission electron microscopy